Acknowledging the Role of Buck Converter in DC-DC Conversion
DOI:
https://doi.org/10.63995/YPYR7862Keywords:
DC-DC Conversion; Efficiency; Inductor; Portable Electronics; Power Management; Switching Regulator; Voltage RegulationAbstract
The buck converter, a type of DC-DC converter, plays a crucial role in modern electronic systems by efficiently stepping down voltage levels. This process is essential for devices that require stable and lower voltage inputs from a higher voltage source, such as batteries or power supplies. The buck converter operates through a combination of switching elements, typically a transistor and a diode, and energy storage components like inductors and capacitors. By rapidly switching the transistor on and off, the converter regulates the voltage output, minimizing energy loss and enhancing efficiency. This capability is pivotal in various applications, including portable electronics, electric vehicles, and renewable energy systems, where efficient power management is critical. The buck converter's ability to maintain high efficiency, compact size, and reliable performance makes it a fundamental component in the design of power supplies for a wide range of electronic devices, contributing to energy conservation and system optimization.
References
Naeim Safari. Design of a DC/DC buck converter for ultra-low power applications in 65nm CMOS Process. 2012.
Arjyadhara Pradhan and Bhagbat Panda. “Design of DC-DC converter for load matching in case of PV system”. In: 2017 International Conference on Energy, Communication, Data Analytics and Soft Computing (ICECDS). IEEE. 2017, pp. 1002–1007.
Sadman Sakib, Md Fahim Hasan Khan, Md Ashiqur Rahman, and Md Zamilur Reza. “DC-DC and AC-DC Zeta and buck converter design and analysis for high efficiency application”. PhD thesis. Department of Electrical and Electronic Engineering, Islamic University of . . ., 2017.
Sudip K Mazumder, Muhammad Tahir, and Srividya Lavanya Kamisetty. “Wireless PWM control of a parallel DC-DC buck converter”. In: IEEE transactions on power electronics 20.6 (2005), pp. 1280–1286.
Dhananjay Choudhary and Anmol Ratna Saxena. “DC-DC buck-converter for MPPT of PV system”. In: International Journal of Emerging Technology and Advanced Engineering 4.7 (2014), pp. 813–821.
Haoyu Yuze and He Bo. “Microbiome Engineering: Role in Treating Human Diseases”. In: Fusion of Multidisciplinary Research, An International Journal (FMR) 1.1 (2020), pp. 14–24.
Jia-Ming Liu, Pai-Yi Wang, and Tai-Haur Kuo. “A current-mode DC–DC buck converter with efficiency-optimized frequency control and reconfigurable compensation”. In: IEEE transactions on power electronics 27.2 (2011), pp. 869–880.
Abdullah Altamimi and Zafar A Khan. “A DC-DC buck converter with maximum power point tracking implementation for photovoltaic module application”. In: 2017 IEEE Conference on Energy Conversion (CENCON). Ieee. 2017, pp. 305–310.
Suresh Singh and Deepak Fulwani. “Voltage regulation and stabilization of dc/dc buck converter under constant power loading”. In: 2014 IEEE international conference on power electronics, drives and energy systems (PEDES). IEEE. 2014, pp. 1–6.
Shafinaz A Lopa, Shahzad Hossain, MK Hasan, and TK Chakraborty. “Design and simulation of DC-DC converters”. In: International Research Journal of Engineering and Technology (IRJET) 3.01 (2016), pp. 63–70.
Irfan Jamil, Zhao Jinquan, and Rehan Jamil. “Analysis, Design and Implementation of ZeroCurrent-Switching Resonant Converter DC-DC Buck Converter”. In: International Journal of Electrical and Electronics Engineering (IJEEE) Vol 2 (2014), pp. 1–12.
Nakamura Shuto, Akari Chiyo, Himari Ken, and Sato Tanaka. “Quantum Materials to the Pioneering Future of Computing and Communication”. In: Fusion of Multidisciplinary Research, An International Journal (FMR) 1.1 (2020), pp. 50–62.
DW Spier, German Gustavo Oggier, and SAO Da Silva. “Dynamic modeling and analysis of the bidirectional DC-DC boost-buck converter for renewable energy applications”. In: Sustainable Energy Technologies and Assessments 34 (2019), pp. 133–145.
Vincent Wai-Shan Ng. Switched capacitor DC-DC converter: Superior where the buck converter has dominated. University of California, Berkeley, 2011.
Zaohong Yang and PC Sen. “DC-to-DC buck converters with novel current mode control”. In: 30th Annual IEEE Power Electronics Specialists Conference. Record.(Cat. No. 99CH36321). Vol. 2. IEEE. 1999, pp. 1158–1164.
Carlos Restrepo, Javier Calvente, Angel Cid-Pastor, Abdelali El Aroudi, and Roberto Giral. “A noninverting buck–boost DC–DC switching converter with high efficiency and wide bandwidth”. In: IEEE transactions on Power Electronics 26.9 (2011), pp. 2490–2503.
Jimeno Estanislau, Federico Hermogenes, and Bernardo Clemente. “Battery Energy Transformation and Unravelling the Thermodynamics of Energy Storage and Conversion”. In: Fusion of Multidisciplinary Research, An International Journal (FMR) 2.1 (2021), pp. 122–135.
Claudio H Rivetta, Ali Emadi, Geoffrey A Williamson, Ranjit Jayabalan, and Babak Fahimi. “Analysis and control of a buck DC-DC converter operating with constant power load in sea and undersea vehicles”. In: IEEE Transactions on Industry Applications 42.2 (2006), pp. 559–572.
Jeffrey Hwang, Alland Chee, and Wing-Hung Ki. “New universal control methods for power factor correction and DC to DC converter applications”. In: Proceedings of APEC 97-Applied Power Electronics Conference. Vol. 1. IEEE. 1997, pp. 59–65.
Fang Lin Luo and Hong Ye. Advanced dc/dc converters. crc Press, 2016.
NH Baharudin, TMNT Mansur, FA Hamid, R Ali, and MI Misrun. “Performance analysis of DC-DC buck converter for renewable energy application”. In: Journal of Physics: Conference Series. Vol. 1019. IOP Publishing. 2018, p. 012020.
Humam Al-Baidhani, Thomas Salvatierra, Raúl Ordóñez, and Marian K Kazimierczuk. “Simplified nonlinear voltage-mode control of PWM DC-DC buck converter”. In: IEEE Transactions on Energy Conversion 36.1 (2020), pp. 431–440.
Bauyrzhan Satipaldy, Taigan Marzhan, Ulugbek Zhenis, and Gulbadam Damira. “Geotechnology in the Age of AI: The Convergence of Geotechnical Data Analytics and Machine Learning”. In: Fusion of Multidisciplinary Research, An International Journal (FMR) 2.1 (2021), pp. 136–151.
Fang Lin Luo and Hong Ye. Essential Dc/Dc Converters. CRC Press, 2018.
K Bendaoud, S Krit, M Kabrane, H Ouadani, M Elaskri, K Karimi, H Elbousty, and L Elmaimouni. “Fuzzy logic controller (FLC): Application to control DC-DC buck converter”. In: 2017 International Conference on Engineering & MIS (ICEMIS). IEEE. 2017, pp. 1–5.
Sharmila Sumsurooah, Milijana Odavic, Serhiy Bozhko, and Dushan Boroyevich. “Robust stability analysis of a DC/DC buck converter under multiple parametric uncertainties”. In: IEEE Transactions on Power Electronics 33.6 (2017), pp. 5426–5441.
Paulo Henrique Feretti and Fernando Lessa Tofoli. “A DC-DC buck-boost converter based on the three-state switching cell”. In: 2017 Brazilian Power Electronics Conference (COBEP). IEEE. 2017, pp. 1–6.
Adrichem De Jong, Mark Jansen, Jeffrey Van Dijk, and Johannes Meyer. “Analysis of Innovative Practices in Advanced Materials and Structural Engineering”. In: Fusion of Multidisciplinary Research, An International Journal (FMR) 2.1 (2021), pp. 178–188.
Sudip K Mazumder, Ali H Nayfeh, and Dushan Boroyevich. “Theoretical and experimental investigation of the fast-and slow-scale instabilities of a DC-DC converter”. In: IEEE Transactions on Power Electronics 16.2 (2001), pp. 201–216.
Mustafa Abbas Fadel Al-Qaisi, Mohanad A Shehab, Ammar Al-Gizi, and Mohammed Al-Saadi. “High performance DC/DC buck converter using sliding mode controller”. In: International Journal of Power Electronics and Drive Systems 10.4 (2019), p. 1806.
Seong Joong Kim, Qadeer Khan, Mrunmay Talegaonkar, Amr Elshazly, Arun Rao, Nathanael Griesert, Greg Winter, William McIntyre, and Pavan Kumar Hanumolu. “High frequency buck converter design using time-based control techniques”. In: IEEE Journal of Solid-State Circuits 50.4 (2014), pp. 990–1001.
Yan Zhang, Jinjun Liu, Xiaolong Ma, and Junjie Feng. “Comparison of conventional DC-DC converter and a family of diode-assisted DC-DC converter in renewable energy applications”. In: Journal of Power Electronics 14.2 (2014), pp. 203–216.
